As usual, the quality roofing sheet roll forming machine is to press the fixed thickness of color steel plate.In fact, the thickness of the machine is adjustable and controllable, which can press thin plate and thick plate. However, some customers have tried, when the normal processing of 0.8 color steel plate can work normally, but when it is changed to a slightly thinner color steel plate, there will be poor molding effect and plate with poor quality. When replaced with a thicker color steel plate, the machine will run slowly and the steel plate will be scratched.
It should be noted that the size between the upper and lower two rows of rollers is fixed,which can press the specified size of the color steel plate.And if we want thin or thick plate, we need to adjust the gap between the upper and lower two rows of rollers.when we need to press the thin plate, we need to reduce the gap, so as to protect the forming effect of the plate. If you want to process the thick plate, you need to increase the gap a little. The thickness of the plate should be just enough to pass through the distance between the upper and the lower rollers of the ibr roll forming machine for sale.Otherwise the gap is too small, the machine is difficult to operate.If it is too large, the molding effect will be poor.
Although it seems easy to adjust the gap of the high speed trapezoidal roofing sheet roll forming machine, but a little carelessness may cause other problems, such as deviation, size inconsistency, etc.It is recommended to contact the stud and track, roof sheet roll forming machine manufacturers directly when it is necessary to adjust.